Ricoh Priport DX 4640PD Printer Reference page 37

Changing port settings
Follow these steps to change SmartDeviceMonitor for Client settings, such as the
proxy server settings or IPP URL.
Note
❒ There are no port settings for NetBEUI.
A
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
Note
❒ Under Windows XP and Windows Server 2003, click the icon of the printer
you want to use in the [Printers and Faxes] window.
B
Click the [Details] tab, and then click [Port Settings].
The [Port Settings] dialog box appears.
Note
❒ Under Windows 2000/XP, Windows Server 2003, and Windows NT 4.0,
click the [Ports] tab, and then click [Configure Port...]. The [Port Configuration:]
dialog box appears.
• For TCP/IP, you can configure Timeout Settings.
Note
❒ If you cannot select the items on the [Recovery/Parallel Printing] tab, follow
the procedure below.
A Click [Cancel] to close the [Port Settings] dialog box.
B Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
C
Click [Extended Features Settings], and then select the [&Set Recov-
ery/Parallel Printing for each port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure IPP User Settings, Proxy Settings and Timeout
Settings.
Note
❒ For details, see SmartDeviceMonitor for Client Help.
Installing the Software
31
2