Ricoh Priport DX 4640PD Printer Reference page 45

❖ When connecting with the network
• The printer must be set to bidirectional transmission.
• SmartDeviceMonitor for Client included on the CD-ROM must be in-
stalled.
One of the following conditions must also be satisfied as well as the two re-
quirements mentioned above:
• The port for SmartDeviceMonitor and TCP/IP must be used.
• The standard TCP/IP port is used without changing the port name (Win-
dows 2000/XP, Windows Server 2003).
• The IP address specified in the Microsoft TCP/IP Print is used (Windows
NT 4.0).
• The IP address is included in port name, if using IPP protocol.
Note
❒ Under Windows 95/98/Me, [Enable bi-directional support for this printer] must
be selected in [Spool Settings] on the [Details] tab in RPCS printer driver.
❒ Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, [En-
able bidirectional support] must be selected, and [Enable printer pooling] must
not be selected on the [Ports] tab in RPCS printer driver.
❖ When connecting with a parallel cable
• The computer must support bidirectional transmission.
• The printer must be set to bidirectional transmission.
• The printer parallel port and computer parallel port are connected using a
parallel interface cable that supports bidirectional transmission.
Note
❒ Under Windows 95/98/Me, [Enable bi-directional support for this printer] must
be selected in [Spool Settings] on the [Details] tab in RPCS printer driver.
❒ Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, [En-
able bidirectional support] must be selected, and [Enable printer pooling] must
not be selected on the [Ports] tab in RPCS printer driver.
Installing the Software
39
2