Requirements; Using The Parallel Interface Cable - Ricoh Priport DX 4640PD Printer Reference

Requirements

Before using this printer, make sure all environmental and electrical require-
ments are met. Connect the printer to the host computer using the parallel inter-
face port, network interface unit, or both.
Make sure all interface cables, connectors, and electrical outlets necessary to at-
tach the printer to the host computer or network are at hand.
Important
❒ The interface cable is not supplied. It is your responsibility to prepare the in-
terface cable appropriate for the computer that you are using.

Using the Parallel interface Cable

Connect the printer to the host computer using a parallel interface cable compli-
ant with IEEE 1284 (available separately).
Follow these steps to connect the printer to the host computer.
Important
❒ Before connecting an interface cable between the printer and a computer,
make sure that the printer is not operating, and then turn off the main power
switches of the printer and the computer.
A
Attach the parallel interface cable to the parallel interface connector of the
printer, and then secure the parallel interface cable.
B
Attach the other end of the parallel interface cable to the port of the compu-
ter. Secure the interface cable.
ACV014S
Connecting the Machine
2
13