Table of Contents
Advertisement
Note:
a Windows 95 or Windows 98 system configured
for FAT 32.
Note:
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
7. After you select the FAT type, a FAT 16 or FAT 32
Partition warning screen appears indicating that the
system is about to partition and format your hard drive
using the FDISK program. This warning screen contains
three options: Back, Exit, and Continue.
8. Click
Continue
FAT type selected, the system reboots, the partitions are
formatted, and the OS and drivers load from the CD.
The "Operating System Restore Completed" screen
appears when all files have been restored.
9. Remove the CD from the CD tray.
10. Click
OK
to reboot.
This completes the Custom Rebuild and Restore procedure.
See "NEC Application and Driver CD" for instructions on
installing any of the applications or online documents, or to
install device drivers that did not come with your system.
Restore any application or driver that was not provided by
NEC by using the vendor diskette(s) or CD-ROM(s) included
in its original packaging.
3-28 Configuring the System
Some older software may not work in
In Windows NT 4.0 systems, the
. The system performs FDISK using the
Advertisement
Table of Contents
