Configuration Tools And Utilities - NEC POWERMATE ES 5200 Manual

This chapter provides information on configuring your
computer. It includes information about the CMOS Setup
Utility for configuring hardware and the system. It also
provides information about the Flash utility for BIOS
updates, the NEC OS Restore CD for rebuilding the hard
drive and/or restoring the operating system, and the NEC
Application and Driver CD for installing the NEC-supplied
applications and optional drivers. In addition, it provides
jumper settings for physically configuring devices in the
system.
See the following table for a quick guide to the configuration
utilities, tools, and procedures. For detailed information about
these and other tools, see the sections following the table.

Configuration Tools and Utilities

The following table lists ways you can configure the system,
and the utility, tool, or procedure to use for the configuration.
Note:
System Resources," for ways to manage system
resources and to configure the system remotely.
Configuration Tools and Utilities
Configuration
Adding or removing hardware (hard drive,
diskette drive, CD-ROM drive, tape backup)
Base I/O address, changing
BIOS, updating
3-2 Configuring the System
Also see the next chapter, "Managing
Method, Tool, or Utility
CMOS Setup (Standard
CMOS Setup menu, Integrated
Peripherals menu)
CMOS Setup (Integrated
Peripherals menu)
FLASH utility