Table of Contents
Advertisement
T
Disconnect your system from telephone and power lines
when an electrical storm threatens. If you have a
fax/modem, lightning can travel in on the phone line and
damage both the fax/modem and the system unit.
Lightning can also travel in on power lines and damage
your monitor and system unit.
T
Be sure that system power is off before you connect or
disconnect a cable. Never make cable changes when the
system power is on. Doing so can damage the system and
its peripherals.
T
Use CMOS Setup Utility options to protect against viruses
(see "BIOS Features Setup" in Chapter 3). Use appropriate
virus detection software regularly to protect your system
from computer viruses.
If you plan to use software programs other than NEC CSD
supplied software, NEC CSD strongly recommends that
you take the necessary steps, such as virus checks, to
protect your system.
T
Place your computer away from direct sunlight and
extreme hot and cold temperatures.
The recommended operating environment is from 32°F to
95°F (0°C to 35°C).
T
After turning off power, wait about five seconds for the
hard drive to spin down before you power on again.
T
Be sure that nothing is placed on top of your system power
cables.
T
Prevent dust from entering your system by covering it
when it is not in use.
2-8 Setting Up the System
Advertisement
Table of Contents
