Table of Contents
Advertisement
T
Always hold a chip or board by its edges. Avoid touching
the components on the chip or board.
T
Take care when connecting or disconnecting cables. A
damaged cable can cause a short in the electrical circuit.
T
When installing a cable, route the cable so it is not pinched
by other components and is out of the path of the system
unit covers.
T
Prevent damage to the connectors by aligning connector
pins before you connect the cable.
Misaligned connector pins can cause damage to system
components at power-on.
T
When disconnecting a cable, always pull on the cable
connector or strain-relief loop, not on the cable itself.
Small Desktop and Desktop
System Unit Cover
The following sections describe how to remove and replace
the system unit cover for the small desktop and desktop
systems. (For the minitower system, see "Minitower System
Unit Covers.")
Removing the Small Desktop or Desktop Cover
Before installing optional hardware inside your system, you
must first remove the cover on the system unit.
Before removing the system unit cover, turn off
the power and unplug the system power cable.
Power is removed only when the power cable is
unplugged.
5-4 Installing Options
!
WARNING
Advertisement
Table of Contents
