Table of Contents
Advertisement
A – Latch in Incorrect Position
B – System Board Rail
! CAUTION
To prevent damage to the latch, align the system
board with the outside edge of the chassis before
closing the latch.
4. Push the latch closed. This slides the board the rest of the
way into the system unit and secures it into the connector
on the riser board.
! CAUTION
If the board does not slide when you push the
latch, slide the board out of the unit a bit and
check the alignment position (see the previous
figures). Push the latch closed.
C – Edge of Chassis
D – Edge of System Board
Installing Options 5-43
Advertisement
Table of Contents
