NEC POWERMATE ES 5200 Manual page 235

2. Point to
Programs
.
HyperTerminal
3. Double click the
Hypertrm.exe
program appears.
4. Follow the instructions on the screen to set up your
modem. Click the
information about dialing the phone number.
If you need to check communications settings, check that
the settings match the following BBS parameters.
T
Baud rate : select any baud rate that matches your
modem
T
Parity : none
T
Data bits : 8
T
: 1
Stop bits
T
: Xon/Xoff (select Hardware if using
Flow control
14.4 Kbps or higher).
5. Following the HyperTerminal instructions, enter the BBS
phone number ( 916-379-4499
system and/or location might require a
Note:
The first time that you use the BBS,
you are requested to provide information for a
new user questionnaire.
6. Press
twice.
Enter
7. Enter your first name, last name, and password. Press
Enter after each.
. Point to
Accessories
icon. The HyperTerminal
help button for
HyperTerminal
). Your business phone
9 1
Getting Services and Support 7-7
and then click
or 1 prefix.