Table of Contents
Advertisement
T
See your network administrator for guidelines on
configuring the system for network access.
T
Set the voltage switch correctly for your area. The correct
setting for the U.S. and Canada is 115V.
Set the voltage switch correctly for your area.
T
Connect system power connectors to a surge protector
(recommended) or a properly grounded wall outlet.
Note:
Immediate Boot-Up, the system starts up as
soon as the power cord is connected. See
"Startup" and "Jumper Settings."
NEC CSD recommends connecting power cables
to a surge protector.
Startup
You can start up the system in two ways:
T
by pressing the power button
T
by connecting the power cable (if the system board is
jumpered for Immediate Boot-Up).
When the system starts up, the power lamp lights green to
indicate that the system is on. The NEC startup screen
appears.
!
WARNING
If the system board has been set for
! CAUTION
Setting Up the System 2-3
Advertisement
Table of Contents
