Table of Contents
Advertisement
Internal hard drive screws — desktop
4. With the cable connectors toward the interior of the
system, place the new the hard drive in the bracket and
align the screw holes.
5. Insert and tighten the two screws to secure the hard drive
in the bracket.
6. Connect the device cables (see "Connecting Device
Cables" and "IDE Drive Cabling").
7. Replace the system unit cover (see "Replacing the Small
Desktop or Desktop Cover").
8. Run the Setup program to set the new configuration (see
"CMOS Setup Utility" in Chapter 3).
Installing Options 5-93
Advertisement
Table of Contents
