Table of Contents
Advertisement
Aligning the front panel — small desktop
Removing the Front Panel — Desktop
Remove the desktop front panel before installing a device in
one of the 5 1/4-inch accessible device bays.
If you are installing an accessible 5 1/4-inch device, you
might also need to remove the blank panel that covers the bay
on the front panel and/or the metallic shield on the chassis.
Remove the front panel, blank panel, and shield as follows.
1. Remove the system unit cover (see "Removing the Small
Desktop or Desktop Cover").
2. Locate the eight locking tabs that secure the front panel to
the chassis. Push each tab to release it from its slot in the
chassis.
Note:
are locking tabs that must be released before the
panel can be removed (see the following figure).
5-78 Installing Options
The eight tabs inside the front panel
Advertisement
Table of Contents
