2.8
Restarting the ZyAIR
You must restart the ZyAIR every time you change the system IP address or upload a firmware or
configuration file.
Click SYSTEM TOOLS, RESTART and then Apply.
When the ZyAIR restarts, all connections will be terminated. Anyone using a
system account will need to log in again. The subscribers may also need to log in
2.9
Logging Out of the Web Configurator
Click LOGOUT to exit from the web configurator.
The Web Configurator
Figure 2-9 Restart
again.
Figure 2-10 Logging Out
ZyAIR B-4000 Hot Spot Gateway
2-13