Resetting The Vsg; Restarting The Vsg - ZyXEL Communications Vantage Service Gateway VSG-1200 V2 User Manual

Vantage service gateway
Hide thumbs Also See for Vantage Service Gateway VSG-1200 V2:
Table of Contents

Advertisement

VSG-1200 V2 User's Guide
Table 3 System Tools: System Account (continued)
LABEL
Confirm
Supervisor Account
Username
Password
Confirm
Super Subscriber
Account
Super Subscriber
Idle Timeout
Username
Password
Confirm
Apply

3.7 Resetting the VSG

You can restore the device to the factory defaults in one of the following ways.
• The RESET button on the front panel of the VSG (press this button once). Use this
method for cases when the username and password of the VSG is not known (refer to
Section 2.2.1.5 on page
• The web configurator (refer to
• The SMT (refer to

3.8 Restarting the VSG

Note: You must restart the VSG every time you change the system IP address or
upload a firmware or configuration file.
All unsaved changes will be lost once you restart the VSG.
In the Main Menu screen, click System Tools, Restart and click Apply.
47
DESCRIPTION
Enter the new administrator password again for confirmation.
This account allows you to view device status only.
Enter the user name for the supervisor account. The default is supervisor
Enter a new supervisor password. The default is supervisor.
Enter the new administrator password again for confirmation.
Once you have configured the Internet connection settings on the VSG, you
can use this account to test the Internet connection through the VSG.
Select Enable to activate this account.
Select Disable to deactivate this account.
By default, the VSG automatically logs out a super subscriber after five minutes
of inactivity.
Enter a number (1 to 1440) to set the VSG to log out the super subscriber after
the specified inactivity timeout (in minutes).
Enter the user name for the account manager account. The default is super.
Enter a new account manager password. The default is super.
Enter the new administrator password again for confirmation.
Click Apply to save the changes back to the VSG.
40).
Section 3.7 on page
Section 29.4 on page
200).
47).
Chapter 3 The Web Configurator

Advertisement

Table of Contents
loading

Table of Contents