Back To Factory Defaults; Restart Screen; Figure 214 Configuration Upload Error; Figure 215 Reset Warning Message - ZyXEL Communications ZyWall 70 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 70:

Table of Contents

ZyWALL 70 User's Guide

25.10.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and

returns the ZyWALL to its factory defaults as shown on the screen. The following warning

screen will appear.

You can also press the RESET button on the rear panel to reset the factory defaults of your

ZyWALL. Refer to

System restart allows you to reboot the ZyWALL without turning the power off.

Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This

does not affect the ZyWALL's configuration.

Section 2.3 on page 60

for more information on the RESET button.

Chapter 25 Maintenance