Configuring More Connections Advanced Setup; Figure 35 Network > Wan > More Connections: Edit: Advanced Setup; Table 21 Network > Wan > More Connections: Edit: Advanced Setup - ZyXEL Communications P-660HN User Manual

Table 20 Network > WAN > More Connections: Edit (continued)
LABEL
Apply
Cancel
Advanced Setup

5.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced
Setup button in the More Connections Edit screen. The screen appears as shown.
Figure 35 Network > WAN > More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 21 Network > WAN > More Connections: Edit: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
ATM QoS
P-660HN-Fx User's Guide
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the More Connections Advanced Setup screen and
edit more details of your WAN setup.
DESCRIPTION
This section is not available when you configure the ZyXEL Device to be in
bridge mode.
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used
to establish membership in a multicast group. The ZyXEL Device supports
IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable it.
Chapter 5 WAN Setup
79