2 The next wizard screen varies depending on what mode and encapsulation type you use.
All screens shown are with routing mode. Configure the fields and click Next to
continue. See
Figure 17 Internet Connection with PPPoE
The following table describes the fields in this screen.
Table 9
Internet Connection with PPPoE
LABEL
User Name
Password
Service Name
Back
Apply
Exit
Figure 18
P-660HN-Fx User's Guide
Section 4.3 on page 60
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Enter the password associated with the user name above.
Type the name of your PPPoE service here.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to close the wizard screen without saving.
Internet Connection with RFC 1483
Chapter 4 Internet and Wireless Setup Wizard
for wireless connection wizard setup
57