Table of Contents
Advertisement
Chapter 3 Status Screens
Table 6 Packet Statistics (continued)
LABEL
Rx B/s
Up Time
LAN Port Statistics
Interface
Status
TxPkts
RxPkts
Collisions
Poll Interval(s)
Set Interval
Stop
3.6 Any IP Table
Click Status > AnyIP Table to access this screen. Use this screen to view the IP address and
MAC address of each computer that is using the ZyXEL Device but is in a different subnet
than the ZyXEL Device.
Figure 10 Any IP Table
Each field is described in the following table.
Table 7 Any IP Table
LABEL
#
IP Address
MAC Address
Refresh
50
DESCRIPTION
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This field displays either Ethernet (LAN ports) or Wireless (WLAN port).
For the LAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN port, it displays the transmission rate when WLAN is enabled or
N/A when WLAN is disabled.
This field displays the number of packets transmitted on this interface.
This field displays the number of packets received on this interface.
This is the number of collisions on this interfaces.
Type the time interval for the browser to refresh system statistics.
Click this to apply the new poll interval you entered in the Poll Interval field
above.
Click this to halt the refreshing of the system statistics.
DESCRIPTION
This field is a sequential value. It is not associated with a specific entry.
This field displays the IP address of each computer that is using the ZyXEL Device
but is in a different subnet than the ZyXEL Device.
This field displays the MAC address of the computer that is using the ZyXEL
Device but is in a different subnet than the ZyXEL Device.
Click this to update this screen.
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
