Configuring More Connections Advanced Setup - ZyXEL Communications P-660HW-Tx v3 User Manual
Zyxel 802.11g wireless adsl2+ 4-port gateway
Hide thumbs
Also See for P-660HW-Tx v3:
- User manual (428 pages) ,
- Support notes (116 pages) ,
- Quick start manual (10 pages)
Table of Contents
Advertisement
5.3.2 Configuring More Connections Advanced Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 16 Network > Internet (WAN) > More Connections: Edit: Advanced Setup
The following table describes the labels in this screen.
Table 15 Network > Internet (WAN) > More Connections: Edit: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
ATM QoS
P-660HW-Tx v3 User's Guide
DESCRIPTION
This section is not available when you configure the ZyXEL Device
to be in bridge mode.
Select the RIP direction from None, Both, In Only and Out
Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer
protocol used to establish membership in a multicast group. The
ZyXEL Device supports IGMP-v1, IGMP-v2 and IGMP-v3.
Select None to disable it.
Chapter 5 Internet (WAN) Setup
99
Advertisement
Table of Contents
Troubleshooting
