Chapter 14 802.1Q/1P
Figure 128 Advanced > 802.1Q/1P > Port Setting: Example
Ports 3 and 4 are connected to desktop computers and are used for Internet traffic. You want to
create low priority for this type of traffic, so you want to group these ports and PVC2 into one
VLAN (VLAN3). PVC2 priority is set to low level of service.
SSID1 and SSID2 are two wireless networks. You want to create medium priority for this type
of traffic, so you want to group these ports and PVC3 into one VLAN (VLAN4). PVC3
priority is set to medium level of service.
Follow the same steps as in VLAN2 to configure the settings for VLAN3 and VLAN4. The
summary screen should then display as follows.
218
P-660HN-Fx User's Guide