The Wps Station Screen; Figure 58 Network > Wireless Lan > Wps Station; Table 38 Network > Wireless Lan > Wps Station - ZyXEL Communications P-660HN User Manual

Chapter 7 Wireless LAN
Table 37 Network > Wireless LAN > WPS
LABEL
Release_Con
figuration
Apply
Refresh

7.5 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button Configuration
(PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 58 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input station's
PIN number
118
DESCRIPTION
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security settings for
WPS connections on the ZyXEL Device.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Click this to add another WPS-enabled wireless device (within wireless range of
the ZyXEL Device) to your wireless network. This button may either be a physical
button on the outside of device, or a menu button similar to the Push Button on
this screen.
Note: You must press the other wireless device's WPS button within
two minutes of pressing this button.
Enter the PIN of the device that you are setting up a WPS connection with and click
Start to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device's
settings.
Note: You must also activate WPS on that device within two minutes
to have it present its PIN to the ZyXEL Device.
P-660HN-Fx User's Guide