Table of Contents
Advertisement
Chapter 14 802.1Q/1P
Table 81 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
Tx Tag
Back
Apply
Cancel
14.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced > 802.1Q/1P > Port Setting to display the following screen.
Figure 132 Advanced > 802.1Q/1P > Port Setting
The following table describes the labels in this screen.
Table 82 Advanced > 802.1Q/1P > Port Setting
LABEL
Ports
802.1Q PVID
222
DESCRIPTION
Select Tx Tagging if you want the port to tag all outgoing traffic trasmitted through
this VLAN. You select this if you want to create VLANs across different devices and
not just the ZyXEL Device.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
This field displays the types of ports available to join the VLAN group.
Assign a VLAN ID for the port. The valid VID range is between 1 and 4094. The
ZyXEL Device assigns the PVID to untagged frames or priority-tagged frames
received on this port.
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
