Remote Management; Chapter 17 Remote Management; Overview; Figure 143 Remote Management From The Wan - ZyXEL Communications P-660HN User Manual

C
H A P T E R

17.1 Overview

Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
The following figure shows remote management of the ZyXEL Device coming in from the
WAN.

Figure 143 Remote Management From the WAN

When you configure remote management to allow management from the
WAN, you still need to configure a firewall rule to allow access.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
To disable remote management of a service, select Disable in the corresponding Access Status
field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
P-660HN-Fx User's Guide

Remote Management

LAN
WAN
HTTP
Telnet
17
243