Table of Contents
Advertisement
Chapter 15 Quality of Service (QoS)
Table 85 Advanced > QoS > Class Setup: Edit (continued)
LABEL
Ethernet Priority
VLAN ID
Physical Port
Remote Node
Exclude
Back
Apply
Cancel
15.4 The QoS Monitor Screen
Use this screen to view the ZyXEL Device's QoS packet statistics. Click Advanced > QoS >
Monitor. The screen appears as shown.
Figure 141 Advanced > QoS > Monitor
The following table describes the labels in this screen.
Table 86 Advanced > QoS > Monitor
LABEL
Priority Queue
Pass
Drop
Poll Interval(s)
234
DESCRIPTION
Select this option and select a priority level (between 0 and 7) from the drop
down list box.
"0" is the lowest priority level and "7" is the highest.
Select this option and specify a VLAN ID number between 2 and 4094.
Select this option and select a LAN port.
Select this option and select a remote node from the drop down list box. When
the WAN type is Ethernet in the WAN > Internet Access Setup screen, you
can select WAN1 only.
Select this option to exclude the packets that match the specified criteria from
this classifier.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
This shows the priority queue number.
Traffic assigned to higher index queues gets through faster while traffic in lower
index queues is dropped if the network is congested.
This shows how many packets mapped to this priority queue are transmitted
successfully.
This shows how many packets mapped to this priority queue are dropped.
Enter the time interval for refreshing statistics in this field.
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
