Using Upnp In Windows Xp Example; Figure 158 Network Connections - ZyXEL Communications P-660HN User Manual

Chapter 18 Universal Plug-and-Play (UPnP)

18.4 Using UPnP in Windows XP Example

This section shows you how to use the UPnP feature in Windows XP. You must already have
UPnP installed in Windows XP and UPnP activated on the ZyXEL Device.
Make sure the computer is connected to a LAN port of the ZyXEL Device. Turn on your
computer and the ZyXEL Device.
Auto-discover Your UPnP-enabled Network Device
1 Click Start and Control Panel. Double-click Network Connections. An icon displays
under Internet Gateway.
2 Right-click the icon and select Properties.

Figure 158 Network Connections

3 In the Internet Connection Properties window, click Settings to see the port mappings
there were automatically created.
260
P-660HN-Fx User's Guide