Table of Contents
Advertisement
Chapter 2 Introducing the Web Configurator
The icons provide the following functions.
Table 2 Web Configurator Icons in the Title Bar
ICON
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL Device
features. The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK
TAB
Status
Network
WAN
Internet Access
Setup
More
Connections
WAN Backup
Setup
LAN
IP
DHCP Setup
Client List
IP Alias
Wireless LAN
AP
More AP
WPS Station
WDS
QoS
Scheduling
NAT
General
Port Forwarding
ALG
Security
42
DESCRIPTION
Help: Click this icon to open up help screens.
Wizards: Click this icon to go to the configuration wizards. See
53
for more information.
Logout: Click this icon to log out of the web configurator.
FUNCTION
This screen shows the ZyXEL Device's general device and network status
information. Use this screen to access the statistics and client list.
Use this screen to configure ISP parameters, WAN IP address assignment,
DNS servers and other advanced properties.
Use this screen to configure additional WAN connections.
Use this screen to configure a backup gateway.
Use this screen to configure LAN TCP/IP settings, enable Any IP and other
advanced properties.
Use this screen to configure LAN DHCP settings.
Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
Use this screen to partition your LAN interface into subnets.
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Use this screen to configure multiple BSSs on the ZyXEL Device.
Use this screen to enable WPS (Wi-Fi Protected Setup) and set up your
wireless network.
Use this screen to set up Wireless Distribution System links to other access
points.
Use this screen to enable or disable Quality of Service (QoS).
Use this screen to configure the dates/times to enable or disable the
wireless LAN.
Use this screen to enable NAT.
Use this screen to make your local servers visible to the outside world.
Use this screen to enable or disable SIP ALG.
Chapter 4 on page
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
