Figure 9 Packet Statistics; Table 6 Packet Statistics - ZyXEL Communications P-660HN User Manual

Figure 9 Packet Statistics

The following table describes the fields in this screen.

Table 6 Packet Statistics

LABEL
System Monitor
System up Time
Current Date/Time
CPU Usage
Memory Usage
WAN Port Statistics
Link Status
WAN IP Address
Upstream Speed
Downstream Speed
Node-Link
Status
TxPkts
RxPkts
Errors
Tx B/s
P-660HN-Fx User's Guide
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your ZyXEL Device's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the status of your WAN link.
This is the IP address of the ZyXEL Device's WAN port.
This is the upstream speed of your ZyXEL Device.
This is the downstream speed of your ZyXEL Device.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
Chapter 3 Status Screens
49