Configuring The Tcp/Ip Screen; Figure 96 Network > Tcp/Ip; Table 24 Network > Tcp/Ip - ZyXEL Communications NSA-220 PLUS User Manual

6.2.2 Configuring the TCP/IP Screen

Click Network > TCP/IP in the navigation panel to open the following screen.
If you change the NSA's IP address, you need to log in again after you apply
changes.
Figure 96 Network > TCP/IP
The following table describes the labels in this screen.
Table 24 Network > TCP/IP
LABEL
IP Address
Dynamic
Static
IP Address
IP Subnet
Mask
NSA-220 Plus User's Guide
DESCRIPTION
Select this option to have the NSA get IP address information automatically.
If no IP address information is assigned, the NSA uses Auto-IP to assign itself an
IP address and subnet mask. For example, you could connect the NSA directly to
your computer. If the computer is also set to get an IP address automatically, the
computer and the NSA will choose addresses for themselves and be able to
communicate.
Select this option for the NSA to use fixed TCP/IP information. You must fill in the
following fields.
Type an IP address in this field.
Type an IP subnet mask in this field.
Chapter 6 Network
101