Configuring The Tcp/Ip Screen - ZyXEL Communications NSA-220 Plus User Manual

6.2.2 Configuring the TCP/IP Screen

Click Network > TCP/IP in the navigation panel to open the following screen.
Note: If you change the NSA's IP address, you need to log in again after you apply
changes.
Figure 27 Network > TCP/IP
The following table describes the labels in this screen.
Table 24 Network > TCP/IP
LABEL
IP Address
Dynamic
Static
IP Address
NSA-220 Plus User's Guide
DESCRIPTION
Select this option to have the NSA get IP address information
automatically.
If no IP address information is assigned, the NSA uses Auto-IP to
assign itself an IP address and subnet mask. For example, you could
connect the NSA directly to your computer. If the computer is also
set to get an IP address automatically, the computer and the NSA will
choose addresses for themselves and be able to communicate.
Select this option for the NSA to use fixed TCP/IP information. You
must fill in the following fields.
Type an IP address in this field.
Chapter 6 Network
127