Chapter 29 Ping Command; About Ping Command; Using Ping Command; Figure 124 System Tools > Ping Command - ZyXEL Communications G-4100 V2 User Manual

This chapter covers how to use the PING COMMAND screen.

29.1 About Ping Command

Use the ping function to check the ZyXEL Device's network connection.

29.2 Using Ping Command

Click SYSTEM TOOLS > PING COMMAND to open the following screen.
Figure 124 SYSTEM TOOLS > PING COMMAND
The following table describes the labels in this screen.
Table 56 SYSTEM TOOLS > PING COMMANDT
LABEL
Destination IP
Address
Ping

Chapter 29 Ping Command

DESCRIPTION
Type the IP address of a device on the WAN that you want to ping in order to test the
Internet connection.
Note: This feature tests your Internet connection, so the destination IP
address must be on the WAN. Do not use a LAN IP address.
Click this button to have the device ping the IP address.
C
H A P T E R
Ping Command
G-4100 v2 User's Guide
2 9
221