The Web Configurator; Introducing The Web Configurator; Accessing The Web Configurator; Figure 3 Entering Zyxel Device Ip Address In Internet Explorer - ZyXEL Communications G-4100 V2 User Manual

This chapter introduces how to access the web configurator to perform general system
configuration.

2.1 Introducing the Web Configurator

The web configurator is best viewed with Internet Explorer (version 4.0 or above) or Netscape
Navigator (version 6.0 or above). Your browser must have JavaScript support enabled.

2.2 Accessing the Web Configurator

Follow the steps below to access the web configurator.
Note: The ZyXEL Device allows only one web configurator session at a time.
1 Make sure your ZyXEL Device is properly connected (refer to instructions in the Quick
Start Guide on hardware installation and connections).
2 Launch your web browser and type the WAN or LAN IP address of the ZyXEL Device as
the web address (it is recommended that you connect your computer to the LAN and use
the LAN IP address for initial configuration). 192.168.1.1 is the default IP address for the
LAN port.
If you are using a different port number (between 8000 and 8099) for the web server, you
must also append the port number to the LAN IP address separated with a colon ":", for
example, http://192.168.1.1:8080.

Figure 3 Entering ZyXEL Device IP Address in Internet Explorer

3 A login screen displays. Type "admin" (default) as the user name and "1234" (default) as
the password and click Login.
Note: The user name and password are case sensitive.
Chapter 2 The Web Configurator

The Web Configurator

G-4100 v2 User's Guide
C
H A P T E R
2
35