Server Configuration - ZyXEL Communications G-4100 V2 User Manual

Table 6 ADVANCED > LAN/WAN (continued)
LABEL
Username
Password
PPP MTU Setting
TCP MSS Setting
Connection ID/Name
Connect on Demand
Keep Alive
Apply

4.9 Server Configuration

Click ADVANCED > SERVER to display the screen as shown next. Use this screen to set the
embedded web server, the LAN DHCP server and specify the e-mail server for e-mail
redirection on the ZyXEL Device.
Chapter 4 WAN, LAN and Server Setup
DESCRIPTION
Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Enter the password associated with the user name above.
Enter the MTU (Maximum Transfer Unit) size.
Enter the MSS (Maximum Segment Size) size.
Enter your identification name of the PPTP server assigned to you by the ISP.
Select this option when you don't want the connection up all the time and
specify an idle timeout in the Max Idle Time field. This is the default setting
with an idle timeout of 10 minutes.
Select this option when you want the Internet connection up all the time and
specify a redial period in the Redial Period field. When disconnected, the
ZyXEL Device will attempt to bring up the connection after the redial period.
Click Apply to save the changes.
G-4100 v2 User's Guide
63