ZyXEL Communications G-4100 V2 User Manual page 228

G-4100 v2 User's Guide
Table 63 Troubleshooting a Statement Printer (continued)
STEPS
4
5
228
CORRECTIVE ACTION
Make sure you set the ZyXEL Device to require authentication before allowing Internet
access, see the Wizard Setup screens or the Authentication chapter.
Make sure the IP address of the statement printer is configured in the Account Generator
screen. See Chapter 22 on page
statement printer(s) are using the same port number. If you are using encryption with the
statement printer(s), make sure the secret key is correctly configured in the Account
Generator screen and the statement printer(s). See
statement printer user's guide.
169. Also make sure that the ZyXEL Device and the
Chapter 22 on page 169
Chapter 31 Troubleshooting
and the