Charge By Levels Example; Figure 22 Charge By Levels Example; Table 12 Charge By Levels Example - ZyXEL Communications G-4100 V2 User Manual

G-4100 v2 User's Guide
Table 11 ADVANCED > ACCOUNTING (continued)
LABEL
Charge by levels Disable the charge by level function to charge all of the subscriber's time units only
Level
Conditions
Button Presses
Unit Price
Apply

8.3.1 Charge By Levels Example

This is an example of how charge by levels accounting works. The discount price plan allows
you to make the unit price lower as the subscriber purchases more (meaning a higher number
of button pushes). The Unit Price for level 1 is always the same as the base charge ($2.00 for
this example). The following screen has discount price level 2 set to $1.75 and level 3 set to
$1.50. Taxes are not included in this example.

Figure 22 Charge By Levels Example

A subscriber purchases 11 units. Without charge by levels accounting, the total would be the
number of button presses (11) multiplied by the unit price for the level that the number of
button presses matches. In this case it would be 11x $1.50 for a total of $16.50 (excluding tax).
With charge by levels accounting, you charge the subscriber the rate at each successive level
from the first level (most expensive per unit) to the highest level (least expensive per unit) that
the purchase reaches. In this example, the ZyXEL Device would charge as follows:

Table 12 Charge By Levels Example

The base charge ($2.00) per unit for button presses 1-4.
The level 2, unit price ($1.75) per unit for button presses 5-9.
The level 3, unit price ($1.50) per unit for button presses 10-11.
For a total of:
82
DESCRIPTION
at the highest level (least expensive) that their total number of button presses
reaches.
Enable the charge by levels function to charge the subscriber the rates at each
successive level from the first level (least expensive) to the highest level (least
expensive) that their total number of button presses reaches.
These are the read-only level numbers of the discount charges.
A discount level takes effect whenever the button selected in the Three button
Printer Setting section is pressed more than or the same number of times as the
number displayed in the Button Presses field.
Enter the number of times the button must be pressed to equal that discount level.
Enter each level's charge per time unit.
Click Apply to save your settings to the ZyXEL Device.
($2.00 x 4= $8.00)
($1.75 x 5= $8.75)
($1.50 x 2= $3.00)
$19.75 (excluding tax)
Chapter 8 Accounting