ZyXEL Communications G-4100 V2 User Manual page 158

G-4100 v2 User's Guide
Table 36 Log Formats (continued)
SYSLOG NAME FORMAT
Account Created Id <Mac Address> Account Create <Type, S/N, Username, Unit,
Account
Activated
Subscriber Trace Id <MAC Address> Subscriber Trace <Type, Event, S/N,
User Agreement
Billing Log
LAN Devices
Information
LAN Devices
Alarm
158
Account usage time, Billing profile information>
Where:
Type: TimeToFinish | Accumulation | PostPaid
Billing profile information = index, name
Account usage time: 00:59:59 (example)
Id <Mac Address> Account Activate < Username, User IP, User
MAC, Interface >
Username, User IP, User MAC, Interface, Login time, Logout time,
Usage Time, Time Left, RxData count, TxData count)
Where:
Type: TimeToFinish | Accumulation | PostPaid | Super
Event: Finished | Replenished | Logout | Idle-Timeout | Account
Expired | Deleted
If the type of Subscriber Trace is Super, the Username will be
"********", and S/N will be "******".
Usage time: 00:59:59 (example)
(Id, Mac Address) (User Agreement, Type, User IP, User MAC)
Where:
Type: Agree | Do not agree
Id <Mac Address> Billing Log <, Type, S/N, Username, Billing
profile information, Units, Usage time, Bill, Payment>
Where:
Type: TimeToFinish | Accumulation | PostPaid
Billing profile name: [Name]
Usage time: "00:59:59" (example)
Billing profile information = index, name
Payment: Cash | Credit Card
"Credit Card" does not support "PostPaid".
If Type is "PostPaid", the billing profile information and Units will
be "*".
Id <MAC Address> LAN Devices Information <Number of
devices, Start Number, End number> Device name <status>
[additional information]
Id <MAC Address> LAN Device Alarm <Device name, FAIL>
CREATED
When an
account is
created.
When a
subscriber
account is
activated.
When a
subscriber logs
out.
When "user
agreement" is
enabled.
When a billing
log is created
Each time
interval
specified
(between 1 and
10080 minutes).
When the
ZyXEL Device
cannot connect
to an attached
LAN device.
Chapter 18 Syslog