Table 7 Advanced > Server - ZyXEL Communications G-4100 V2 User Manual

The following table describes the fields in this screen.
Table 7 ADVANCED > SERVER
LABEL
Web Server
HTTP Port
HTTPS Port
Administrator Idle-
Timeout
DHCP Server
DHCP Disable
DHCP Relay
DHCP Server IP
Address
DHCP Server
(Default)
IP Pool Starting
Address
Chapter 4 WAN, LAN and Server Setup
DESCRIPTION
Select this radio button if you want to access the ZyXEL Device using
unsecured HTTP.
Specify the port number of the embedded web server on the ZyXEL Device for
accessing the web configurator. The default port number is 80. Changing the
port number helps protect the ZyXEL Device's web configurator from hacker
attacks.
Enter a number between 8010 and 8060 to access the web configurator behind
a NAT-enabled network.
If you enter a number between 8010 and 8060, you need to append the port
number to the WAN or LAN port IP address to access the web configurator. For
example, if you enter "8010" as the web server port number, then you must
enter "http://192.168.1.1:8010" where 192.168.1.1 is the WAN or LAN port IP
address.
Select this radio button if you want to access the ZyXEL Device using secure
HTTPS.
Secure Socket Layer (SSL) security allows you to create secure connections
between the ZyXEL Device and the management computer(s). Refer to the SSL
(Secure Socket Layer) Security chapter for more information.
Specify the port number of the embedded web server on the ZyXEL Device for
accessing the web configurator. The default port number is 443. Changing the
port number helps protect the ZyXEL Device's web configurator from hacker
attacks.
Enter a number between 4430 and 4440 to access the web configurator behind
a NAT-enabled network.
If you enter a number between 4430 and 4440, you need to append the port
number to the WAN or LAN port IP address to access the web configurator. For
example, if you enter "4430" as the web server port number, then you must
enter "https://192.168.1.1:4430" where 192.168.1.1 is the WAN or LAN port IP
address.
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long
it has been left idle (not recommended).
Select the DHCP mode on the LAN.
Select this option to disable DHCP server on the LAN.
Use this if you have a DHCP server (either a computer or another router) and
you want that DHCP server to also assign network information (IP address,
DNS information etc.) to the devices that connect to the ZyXEL Device. Select
this option to set the ZyXEL Device to forward network configuration requests to
a DHCP server.
Then configure the DHCP Server IP Address field.
If you select DHCP Relay, enter the IP address of a DHCP server (on the
WAN).
Select this option to set the ZyXEL Device to assign network information (IP
address, DNS information etc.) to Ethernet device(s) connected to the LAN
port(s). This is the default setting.
Enter the first of the continuous addresses in the IP address pool.
G-4100 v2 User's Guide
65