Figure 61 Advanced > Filtering; Table 28 Advanced > Filtering - ZyXEL Communications G-4100 V2 User Manual

G-4100 v2 User's Guide
Figure 61 ADVANCED > FILTERING
The following table describes the related labels.
Table 28 ADVANCED > FILTERING
LABEL
Filtering
HTTP Message to
display when a
website is blocked
Please enter new
restricted
destination (up to
50 entries)
URL or Website
Start / End IP
Address
IP Address
Subnet Mask
Add to List
Restricted
Destination List
No
132
DESCRIPTION
Enable filtering to block subscriber access to specified Internet websites or IP
addresses.
Enter a message to display on the subscriber's screen when the system blocks
access to a website.
The default message is "This Web Site is blocked by System".
Use these fields to add to the list of forbidden destinations.
Enter the full URL of the website to which you want to block subscriber access for
example, "http://www.yahoo.com". You can use up to 350 ASCII characters.
Enter the beginning and ending IP addresses of a range of IP addresses to which
you want to block subscriber access.
Enter an IP address to which you want to block subscriber access.
Enter the subnet mask of the IP address to which you want to block subscriber
access.
Click this button to add a new entry to the list of restricted destinations.
This table lists Internet destinations to which the system is to block subscriber
access.
This is the index number of a destination entry.
Chapter 13 Filtering