ZyXEL Communications G-4100 V2 User Manual page 129

Table 27 ADVANCED > PASS THROUGH (continued)
LABEL
Start / End IP
Address
IP Address
Subnet Mask
MAC Address
Mask
Add to List
Pass Through
List
No.
Active
Address List
Type
Delete
Delete All
Apply
Chapter 12 Pass Through
DESCRIPTION
Select this option to allow packets from computers with a specific range of IP
addresses to pass through the ZyXEL Device without entering a user name and
password.
Enter the beginning and ending IP addresses IP addresses in dotted decimal notation,
for example, 192.168.1.10.
Select this option to allow packets from a computer with a specific IP address to pass
through the ZyXEL Device without entering a user name and password. You can
specify a range of IP addresses on a network by specifying an IP address here and a
subnet mask in the Subnet Mask field.
Enter the IP address in dotted decimal notation, for example, 192.168.1.10.
Enter the subnet mask of the IP address that you entered in the IP Address field.
Select this option to allow packets from a computer with a specific MAC address to
pass through the ZyXEL Device without entering a user name and password.
Enter the MAC address of a computer (in 6 hexadecimal pairs separated by a hyphen
"-", for example, 00-50-BA-8D-22-96).
Enter the subnet mask of the MAC address that you entered in the MAC Address
field.
Click this button to add the pass through entry you configured to the Pass Through
List.
This table displays the device and web site address entries that you have set up on the
ZyXEL Device.
This read-only field displays the index number of a pass through entry.
Select this check box to turn on this pass through entry and allow access without a
user name and password.
Clear this check box to turn off this pass through entry and block access without a user
name and password.
This read-only field displays the address(es) of a pass through entry.
This read-only field displays "Destination" for a pass through entry based on a
destination URL or IP address.
The field displays "Subscriber/LAN device" for a pass through entry based on a LAN
device or a subscriber's computer.
Click the column heading to sort the pass through entries by type (Destination or
Subscriber/LAN device).
Select this check box(es) and click Apply to remove the pass through entry.
Click this button to remove all of the pass-through entries.
Click Apply to save the new settings.
G-4100 v2 User's Guide
129