Table 10 Advanced > Billing - ZyXEL Communications G-4100 V2 User Manual

Note: If you change the billing mode, the system erases all accounts and disconnects
all on-line subscribers.
Table 10 ADVANCED > BILLING
LABEL
Pre-Paid
Enable Credit
Card Service
Time to Finish
Accumulation
Idle Time Out
Post-Paid
Idle Time Out
Currency
Number of
decimals places
Tax Percentage
No.
Active
Name
Chapter 7 Billing
DESCRIPTION
Enable this option to allow the subscribers to access the Internet for a pre-defined
time period.
Enable the credit card service to authorize, process, and manage credit transactions
directly through the Internet. Before you enable credit card service, make sure that
your credit service is configured to work and the currency is American dollars. You
must convert all prices on your billing page into American dollars (U.S. dollars). See
the section on credit card for details.
Note: You must also configure your credit card service information in
the ADVANCED > BILLING screen if you want to allow the
subscribers to use credit cards to purchase Internet usage
time.
Select this option to allow each subscriber a one-time login. Once the subscriber
logs in, the system starts counting down the pre-defined usage even if the subscriber
stops the Internet access before the time period is finished.
If a subscriber disconnects and reconnects before the allocated time expires, the
subscriber does not have to enter the user name and password to access the
Internet again.
Select this option to allow each subscriber multiple re-login until the time allocated is
used up.
The ZyXEL Device automatically disconnects a computer from the network after a
period of inactivity. The subscriber may need to enter the username and password
again before access to the network is allowed.
Specify the idle timeout between 1 and 1440 minutes. The default is 5 minutes.
A subscriber can access the Internet without a pre-defined usage time. The printout
only shows the username and password. The hot spot operator can also use the
optional keypad to terminate an account.
Note: You must use an optional keypad with the three-button printer
in order to use the post-paid function.
The ZyXEL Device automatically disconnects a computer from the network after a
period of inactivity. The subscriber may need to enter the username and password
again before access to the network is allowed.
Specify the idle timeout between 1 and 1440 minutes. The default is 5 minutes.
Enter the appropriate currency unit or currency symbol.
Define the number of decimal places (up to 3) to be used for billing. You can also
select whether you would like to use a period (.) or a comma (,) for the decimal point.
Select this check box to charge sales tax for the account. Enter the tax rate (a 5%
sales tax is entered as 5).
The index numbers of the billing profiles.
Select the check box, to activate the billing profile or clear the check box to
deactivate the billing profile.
Enter a name (up to 12 characters) for the billing profile.
G-4100 v2 User's Guide
77