Troubleshooting
When the { { { { Facsimile} } } } Key Is Lit in Red
If this key is lit, press the key to enter the facsimile mode. Then, refer to the table
below and take the appropriate action.
Problem
5
The paper output tray is full.
A facsimile error has occurred.
Out of paper
A network error has occurred.
74
AAG008S
Solutions
Remove the paper from the tray.
The facsimile has a problem. Contact your
service representative. See p.76 "Error Mes-
sages and Their Meanings" The copier will
still function normally.
Add more paper.
"Loading Paper", General Settings Guide
• Check the displayed message. See p.76 "Er-
ror Messages and Their Meanings".
• Check the machine is correctly connected
to the network, and the machine is correct-
ly set. See Network Guide.
• Consult your network administrator.
• When the key is still lit in red even if you
take the measures above, please contact
your service representative.