Registering A Priority Function Using A Program - Ricoh Aficio 2232C User Manual

Simplifying the Operation
Example of registering a program
using Send Later with the fax
number "0123456789"
A Press { { { { 0} } } } , { { { { 1} } } } , { { { { 2} } } } , { { { { 3} } } } , { { { { 4} } } } , { { { { 5} } } } ,
{ { { { 6} } } } , { { { { 7} } } } , { { { { 8} } } } , { { { { 9} } } } using the
number keys.
B Perform the Send Later setting
till the procedure of pressing
[OK] to return to the standby
mode.
Reference
p.3 "Sending at a Specific
Time (Send Later)"
C C C C
Press the { { { { Program} } } } key.
D D D D
Make sure that [Register] is select-
ed.
7
E E E E
Select a program number in which
"*Not Programed" is shown.
128
Note
❒ If you make a mistake, press
[Cancel] and select a program
number again.
❒ When you change a Keystroke
Program, press [Register] after
pressing the program number
you want to change. If you
make a mistake, press [Do not
Register] and return to step
F F F F
Enter the program name, and then
press [OK].
The standby display appears.
Note
❒ If you make a mistake, press
[Backspace] or [Delete All], and
then try again.
❒ You should register the pro-
gram name.
❒ To cancel a programmed pro-
gram, press [Cancel]. The dis-
play returns to that of step
Reference
"Entering Text", General Set-
tings Guide
Registering a priority function using a
program
You can select whether or not the
function registered in program No. 1
will be set after the power is turned
on or the { { { { Clear Modes} } } } key is pressed.
After registering a function in pro-
gram No. 1, select [Program No.1] for
[Change Initial Mode] on the Facsimile
Features menu. See p.144 "General
Settings/Adjustment".
E
.
E
.