Ricoh Aficio 2232C User Manual page 1038

Appendix
Direct printing port
The direct printing port allows print-
ing directly from a computer, con-
nected to the network, to the printer.
Use the "diprint" command to change
direct printing port settings.
❖ ❖ ❖ ❖ View settings
The following command displays
the current direct printing port set-
tings:
msh> diprint
Example output:
port 9100 timeout=300(sec)
bidirect off
• "Port" specifies the port number
of the direct printing port.
• The "bidirect" setting indicates
whether the direct printing port
is bidirectional or not.
❖ ❖ ❖ ❖ Setting timeout
You can specify the timeout inter-
val in use when receiving data
from the network.
msh> diprint timeout
[30~65535]
9
Note
❒ The default is 300 seconds.
❖ ❖ ❖ ❖ Bidirectional configuration for the di-
rect printing port
Use this setting to configure
whether the direct printing port is
bidirectional or not. The default is
"off".
msh> diprint bidirect
{on | off}
Note
❒ If you select [on], SmartNet-
Monitor for Client or Standard
T C P / I P o n W i n d o w s 2 0 0 0
might not work correctly.
104
Netware
Use the " netware " command to con-
figure the NetWare settings such as
the print server name or file server
name.
msh> netware parameter
Parameter Settings
pname Enter the NetWare print serv-
er name using up to 47 char-
acters.
fname Enter the NetWare file server
name using up to 47 charac-
ters.
encap Select the encap type.
[802.3/802.2
/snap/
ethernet2/
auto]
rnum Specify the remote printer
number.
timeout Set the timeout.
mode Select the print server mode.
pserver
mode ps
mode Select the remote printer
rprinter mode.
mode rp
context Specify the NDS context
name.
sap_interva Specify the SAP intervals.
l
Each interval can be set to be-
tween 0 and 3600 seconds in
one-second increments.
login server Specify "login with a selected
file server" as the login mode.
login tree Specify "login with a selected
NDS tree" as the login mode.
tree NDS Select the NDS tree to log on
tree name to.