Single-Line Messages On The Display Panel; Messages Without Code Numbers - Ricoh Aficio 2232C User Manual

Single-line Messages on the Display Panel

This section describes the most common network-related messages that appear
on the display panel. If a message not described here appears, act according to
that message.

Messages without Code Numbers

Reference
Before turning the main power off, see "Turning On the Power", General Set-
tings Guide.
Message
Ethernet board has a problem. An error has occurred in the
Problems with IEEE1394
Board.
HDD has a problem.
Wireless LAN has a problem.
Cannot connect with the wire-
less card.
Problems with the wireless
card.
Problems with the wireless
board.
Causes
Ethernet board.
An error may have occurred
in the IEEE 1394 interface
board.
An error has occurred in the
hard disk drive.
An error has occurred in the
IEEE 802.11b interface unit.
IEEE 802.11b interface unit
was not inserted when the
machine was turned on, or it
was pulled out after the ma-
chine turned on. An error has
occurred in the IEEE 802.11b
interface unit.
An error has occurred in the
IEEE 802.11b interface unit.
An error has occurred in the
IEEE 802.11b interface unit.
Single-line Messages on the Display Panel
Solutions
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
9
117