Ricoh Aficio 2232C User Manual page 436

Troubleshooting
Messages/Second messages
Driver setting error. (Memo-
ry)
Duplex has been cancelled.
4
Ethernet board has a prob-
lem.
Exceeded max capacity of
document server. Cannot
stored.
Exceeded max number of
files of document server. Can-
not stored.
Exceeded max number of
pages of document server.
Cannot stored.
Exceeded max. stored files in
sample print and locked
print.
Exceeded max. stored pages
in sample print and locked
print.
Exceeded max. pages. Collate
is incomplete.
26
Causes
There is an error in the down-
loaded font(s).
Insufficient memory or memo-
ry settings for the printer driv-
er may not match memory
actually installed.
Duplex printing has been can-
celed.
An error has occurred in the
Ethernet board.
Hard disk drive capacity ex-
ceeded storing to the Docu-
ment Server.
The maximum number of files
stored in the Document Server
has been exceeded.
The maximum number of pag-
es stored in the Document
Server has been exceeded.
The maximum number of
stored files has been exceeded
during Sample Print or
Locked Print.
The maximum number of
stored pages has been exceed-
ed during Sample Print or
Locked Print.
The maximum number of pag-
es has been exceeded for colla-
tion.
Solutions
Reset the parameter for down-
loading fonts.
Specify correct memory capac-
ity on the [Change Accesso-
ries...] tab in the RPCS™
printer driver.
To print the image correctly,
increase memory capacity, or
reduce resolution image.
Check the paper used is suita-
ble for duplex printing. Or, in-
crease memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Delete some files stored in the
Document Server or decrease
the file size to be downloaded.
Delete some files stored in the
Document Server.
Delete some pages stored in
the Document Server or de-
crease the number of pages to
be downloaded.
Delete some stored files or re-
duce file sizes.
Reduce the number of pages
to be printed.
Turn off the main power
switch, and back on again. Re-
duce the number of pages to
be printed. If the message ap-
pears again, contact your sales
or service representative.