Ricoh Aficio 2232C User Manual page 223

Placing originals of mixed sizes
When placing different size originals
of the same width in the ADF togeth-
er, the machine automatically checks
the sizes of the originals and makes
copies.
Note
❒ When placing same width origi-
nals of different sizes in the ADF
and making copies without using
the Mixed size function, parts of
the original image might not be
copied, or the paper might jam.
❒ Copy speed and scanning speed
may slow down.
❒ You can place originals of two dif-
ferent sizes at once.
❒ Sizes of originals that can be
placed together using this function
are as follows:
Metric A3L, B4 JIS L, A4KL, B5
version JISKL
11" × 17"L, 8
Inch
" × 11"KL
1
version 8 /
2
A A A A
Press [Special Original].
B B B B
Press [Mixed Size], and then press
[OK].
" × 14"L,
1
/
2
C C C C
Align the rear and left edges of
the originals as shown.
1.
Place the originals into the ADF
2.
Vertical size
D D D D
Adjust the guide to the size of the
widest original.
E E E E
Place the aligned originals face
up in the ADF.
F F F F
Press the { { { { Start} } } } key.
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
❒ Paper with a vertical size of 128–
297 mm (5.1"–11.6") and a horizon-
tal size of 128–432 mm (5.1"–17")
can be placed with this function.
A A A A
Press [Special Original].
B B B B
Press [Custm Size Origi.].
Placing Originals
1
CP19AE
17