Mixing Scan Settings For A Multiple - Ricoh Aficio 2232C User Manual

A A A A
Select the type of image density.
Auto Image Density
A Make sure that [Auto Image Den-
sity] is selected.
Note
❒ If [Auto Image Density] has not
been selected, press [Auto Im-
age Density].
Manual Image Density
A Make sure that [Auto Image Den-
sity] is not selected. If it has
been selected, press [Auto Image
Density] to turn it off.
Note
❒ If [Auto Image Density] has not
been selected, proceed to
step B.
B Press [i i Lighter] or [Darkerj
i i
adjust the density.
Combined Auto and Manual
Image Density
A Make sure that [Auto Image Den-
sity] is selected.
Note
❒ If [Auto Image Density] has not
been selected, press [Auto Im-
age Density].
B Press [i
adjust the density.
The square moves.
Mixing Scan Settings for a
Multiple Page Original
When sending an original of several
pages, you can select a different im-
age density, resolution, and original
type setting for each page.
Place the original, select the scan set-
j ] to
j j
tings for the first page, dial, and then
press the { { { { Start} } } } key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
be placed on the exposure glass
when mixing scan settings for a
multiple page original.
Scan Settings
i Lighter] or [Darkerj i i
2
j j ] to j
33