Ricoh Aficio 2232C User Manual page 1069

Message
session<community name> not defined.
session_ipx<community name> not defined.
Set context to <NDS context name>
shutdown signal received. network service re-
booting...
smbd start. (NetBEUI)
Snmp over ip is ready.
Snmp over IP over 1394 is ready.
Snmp over ipx is ready.
snmpd start.
started.
The print server received error <error
number> during attempt to log in to the net-
work.Access to the network was denied.Verify
that the print server name and password are
correct.
SMTPC: failed to get smtp server ip-address.
SMTPC: failed to connect smtp server. timeout. Failed to connect the SMTP server due to
SMTPC: refused connect by smtp server.
Causes and solutions
The requested community name is not de-
fined.
The requested community name is not de-
fined.
A <NDS context name> has been set.
Rebooting the network service.
An smbd (SMB (Server Message Block) serv-
ice) has started.
Communication over TCP/IP via SNMP is
available.
Communication over IP over 1394 via SNMP
is available.
Communication over IPX via SNMP is availa-
ble.
SNMP service has started.
Direct print service has started.
Cannot log on to the file server. The print serv-
er is not registered or a password is specified.
Register the print server without specifying a
password.
Failed to get the SMTP server IP address. This
could be because:
• The DNS server could not be found.
• There is no connection to the network.
• The specified DNS server could not be con-
nected to.
• Incorrect DNS server is specified.
• No specified SMTP server IP address in
the DNS server.
timeout. This could be because:
• The SMTP server name is incorrect.
• There is no connection to the network.
• The network configuration is incorrect, so
there is no response from the SMTP server.
The connection to the SMTP server is denied.
This could be because:
• Another server other than the SMTP server
has been specified.
• The SMTP server port number is incorrect.
Message List
9
135