Ricoh Aficio 2232C User Manual page 827

❖ ❖ ❖ ❖ Mixed Original Sizes Priority
This setting determines whether
the original size is to be automati-
cally detected when originals of
different sizes are inserted in the
ADF. You can select [On] or [Off].
Note
❒ If the original size is specified
when scanning, this setting is
ignored.
❒ When [Off] is selected and [Auto
Detect] is selected for scan size, if
originals of different sizes are
placed in the ADF, the maxi-
mum size will be detected as the
scan size.
❖ ❖ ❖ ❖ Original Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.39 "Original Orientation and
Scan Area"
❖ ❖ ❖ ❖ Change Initial Mode
If you use the settings which are
d i s p l a y e d w h e n m o d e s a r e
cleared, reset, or immediately after
the operation switch is turned on
as the initial mode, select [Stand-
ard].
Select [Program No.10] when you
use the settings stored in Program
No. 10 as the initial mode.
❖ ❖ ❖ ❖ Auto Colour Select: Mode Priority
Select either [Full Colour] or [Black &
White] for the image quality when
[Scan Type] is set to [Auto Colour Se-
lect].
❖ ❖ ❖ ❖ A.C.S. Sensitivity Level
Set the sensitivity level for detect-
ing colours/black and white to
scan the original when [Scan Type]
is set to [Auto Colour Select].
Selecting a custom size
When selecting [Custom size] as the
scan size, follow the procedure be-
low.
A A A A
Press [Custom size] on the Scan
Size Setting screen.
B B B B
Enter the original size with the
number keys.
Select and enter values for [X1] and
[Y1], and then press the { { { { #} } } } key.
C C C C
Enter the scan starting point in re-
lation to the standard scan start-
ing point.
Select and enter values for [X2] and
[Y2], and then press the { { { { #} } } } key.
Initial Scanner Setup
17
2