Changing Network Targets; Network Targets Option Screen Fields - Nortel CC MIS Getting Started Manual

CC MIS
CC MIS
Configuration Control

Changing network targets

The Config / Networking option allows you set the Preference Weight Fac-
tor for networked ACD groups. (You can also set the Resource Index for
networked groups on non-DMS switches.) The changes made in this option
alters Tables NACDGRP and REMNACD.
The Network Targets screen is shown below.
Network
targets
screen

Network Targets option screen fields

Source/Destination ACD Group Pair - This field identifies the destination
ACD groups that are network targets of the source ACD group. There can
be a total of 48 destination groups per source ACD group.
Node - Identifies the node on which the group resides in the network. This
field is display only when the Networking feature is enabled.
Preference Weighting Factor - This field allows you to change the Prefer-
ence Weight Factor for the source / destination ACD group pair. The range
of this field is 0-32767.
Resource Index Value - This is the current Resource Index for the destina-
tion ACD group. (This is a display only field.)
Page 10-20 CC MIS Getting Started Guide (297-2671-175)
Release 5.2