Release 5.2
Defining communications (Communications Setup screen)
steps
Accessing communication parameters
CC MIS Getting Started Guide (297-2671-175)
The communication parameters are defined at installation. If you need to re-
define these parameters you can do so by accessing the Communications
Setup screen. You access the Communications Setup screen using the steps
below.
1. Return to the CC MIS Main window.
2. Click on Session and select Setup/
Communications
3. The Communications Parameters window appears.
Refer to the CC MIS Online Help for communication field descrip-
tions.
4. Enter changes.
5. Click on the OK button.
CC MIS
CC MIS
Logging into CC MIS
Page 3-5